Section 4: Adjustments and Functions
4.1 How To Use Height Adjustment Feet
Adjust the image elevation using the height adjustment at the front of the projector.
1.Raise the front end of the projector so the feet are not touching the table top.
2.Push the lock button to unlock the foot.
3.Extend or retract each foot to the desired height.
4.Release the lock button to lock the foot into position.
5.For fine adjustments, rotate each foot.
Caution
Do not unlock the foot adjusters if the projector is not supported. If the foot adjusters do not lock completely, turn the foot adjusters slightly before locking.
Front View
MP8745
Side View |
| |||
| 1 | RGB IN | 2 | |
|
|
|
| VIDEO IN |
I | CONTROL | RGB OUT |
| |
|
| |||
O |
|
|
| AUDIO IN |
|
|
|
| R |
|
|
|
| MONO |
|
|
|
| R |
AUDIO IN | AUDIO |
|
| |
1 | 2 | OUT | USB | MD05551 |
|
|
|
| |
|
|
|
| MD05401 |
Figure 4.1 Height Adjustment
ENGLISH
© 3M 1999 | 3M ™ Multimedia Projector MP8745 | 13 |
