7.2 Message/Solution Table
ENGLISH | Error Message Displays | Cause | Solution |
| |||
|
|
|
|
| NO INPUT IS DETECTED. | The projector is not detecting a signal. | Check cable connections to input device. Input device not |
|
|
| connected to this input mode, switch to next mode. |
|
|
|
|
| SYNC IS OUT OF RANGE. | The horizontal frequency of input signal | Switch projector to correct resolution. |
|
| exceeds projector capability. | See Appendix A.5 |
|
|
|
|
| CHANGE THE LAMP. | Nearing end of normal lamp operation time. | Change the projector lamp and reset the lamp operation |
| CALL A MAINTENANCE |
| hours to zero. |
| PERSON. |
|
|
|
|
|
|
| CHANGE THE LAMP. | Remaining lamp operation time = 20 hours | Change the projection lamp and reset the lamp operation |
| CALL A MAINTENANCE | or less. | hours to zero. |
| PERSON. | *Indicates number of hours until power turns |
|
| THE POWER WILL TURN |
| |
| OFF AFTER *hr. | off automatically. |
|
|
|
|
|
| CHANGE THE LAMP. | Normal lamp operating time has expired. | Change the projector lamp and reset the lamp operation |
| (Blinking message) | Safety feature shuts projector down after 10 | hours to zero. |
|
| minutes. |
|
|
|
|
|
24 | 3M™ Multimedia Projector MP8745 | © 3M 1999 |
