![](/images/new-backgrounds/1186615/18661557x1.webp)
TECHNICAL
c)Example of computer signal (continued)
Note 1: MAC adapter is necessary to set the resolution mode.
Projector is compatible with 13 inch mode and 16 inch mode.
Set all dip switches OFF except those indicated below.
MAC 13" mode = switch 1 and 2 are ON
MAC 16" mode = switch 2 and 4 are ON
(Example of 16 inch mode)
Note 2: Some input sources may not be displayed properly because they are not compatible with the projector.
A.6 Indicator Status
The indicators lamps will light or flash to indicate the following operating conditions:
POWER | CHANGE |
|
|
|
|
|
|
| LAMP | COVER | FAN | TEMP | LAMP | Meaning | Remedy |
|
|
|
|
|
|
|
|
Lights |
|
|
|
|
|
|
|
Orange | Off | Off | Off | Off | Off | Standby mode | Normal |
|
|
|
|
|
|
|
|
Flashes |
|
|
|
|
|
|
|
Green | Off | Off | Off | Off | Off | During warm up | Normal |
|
|
|
|
|
|
|
|
Lights | Off | Off | Off | Off | Off | During operation | Normal |
|
|
|
|
|
|
|
|
Green | Flash | Off | Off | Off | Off | The lamp operating | Replace lamp |
| RED |
|
|
|
| hours have reached |
|
|
|
|
|
|
| 950 hours or more |
|
|
|
|
|
|
|
|
|
| Lights | Off | Off | Off | Off | The lamp operating | Replace lamp |
| RED |
|
|
|
| hours have reached |
|
|
|
|
|
|
| 1000 hours or more |
|
|
|
|
|
|
|
|
|
Lights | Off | Lights | Off | Off | Off | Bottom cover is open | Attach the |
Orange |
| RED |
|
|
|
| Bottom cover |
|
|
|
|
|
|
|
|
| Off | Off | Lightd | Off | Off | Cooling fan not | Contact your |
|
|
| RED |
|
| operating | dealer |
|
|
|
|
|
|
|
|
| Off | Off | Off | Flashes | Off | Operating temperature | Check the air filter. |
|
|
|
| RED |
| is above normal range | Remove any |
|
|
|
|
|
|
|
|
| Off | Off | Off | Lights | Off | Operating temperature | objects blocking |
|
|
|
| RED |
| is above normal range | ventilation. Lower |
|
|
|
|
|
| and projector has | the ambient |
|
|
|
|
|
| overheated | temperature. |
|
|
|
|
|
|
| Contact your |
|
|
|
|
|
|
| dealer |
|
|
|
|
|
|
|
|
| Off | Off | Off | Off | Lights | Lamp or internal power | Change lamp. |
|
|
|
|
| RED | failure | Contact your |
|
|
|
|
|
|
| dealer |
|
|
|
|
|
|
|
|
When the LAMP indicator lights or flashes, turn the power off. If the problem persists, contact your dealer.
3M™ Multimedia Projector MP8780 | © 3M 1999 | |
|
|