ENGLISH
LOCATION OF PRODUCT SAFETY LABELS
Safety labels are used on or within the 8780 projector to alert you to items or areas requiring your attention.
DO NOT REMOVE SCREWS EXCEPT USER SERVICE SCREWS "
"
HIGH TEMPERATURE
MAY CAUSE BURNS.
REPLACE THE LAMP UNIT ONLY AFTER IT HAS COOLED.
REPLACE WITH THE SAME LAMP UNIT.
HIGH VOLTAGE
MAY CAUSE AN ELECTRIC SHOCK AND ULTRAVIOLET. REPLACE THE LAMP AFTER FIRST REMOVING THE POWER PLUG FROM THE OUTLET. THIS COVER IS PROVIDED WITH AN INTERLOCK. DON'T DEFEAT THIS INTERLOCK.
DO NOT BLOCK THE VENTILATION HOLES (SIDE AND UNDERNEATH) OF THE UNIT. THIS MAY CAUSE A FAILURE.
CAUTION
! ATTENTION
Visual Systems Division | |
Austin, TX | |
LCD PROJECTOR | 50/60HZ |
MOD NO. MP8780 | MADE IN JAPAN |
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
UL 1950
LISTED 685Z E73930
HIGH TEMPERATURE
MAY CAUSE BURNS.
REPLACE THE LAMP UNIT ONLY AFTER IT HAS COOLED.
EXPLOSION
THE LAMP MAY EXPLODE WHILE IT IS LIT.
HANDLE THE LAMP CAREFULLY SO AS NOT TO DAMAGE IT.
Important
This projection lamp contains mercury. Consult your local hazardous waste regulations and dispose of this lamp in a proper manner.
WARNING
DO NOT STARE DIRECTLY
INTO THE PROJECTION LENS.
SAVE THESE INSTRUCTIONS
The information contained in this manual will help you operate and maintain your 3M MP8780 Multimedia Projector.
4 | 3M™ Multimedia Projector MP8780 | © 3M 1999 |
