3M MP8780 manual Setup, Set Menu RGB Input/Video Input

ENGLISH

4.3 SETUP

The SETUP sub-menu is used to adjust and move the image position. The projector will display either the RGB (Figure 4.4) or Video (Figure 4.5) menu according to the input source being projected.

SETUP	BRIGHTNESS
IMAGE	CONTRAST
OPTION	POSITION
	PHASE
	H SIZE
	AUTO
	MAC MODE
	GAIN

SETUP	BRIGHTNESS
IMAGE	CONTRAST
OPTION	COLOR
	TINT
	SHARPNESS
	GAMMA
	SCAN MODE
	VCR MODE

Figure 4.4 RGB SignalFigure 4.5 Video Signal

Set Menu - RGB Input/Video Input

RGB Screen	Video Screen	Value/Position	Factory Setting
BRIGHTNESS	BRIGHTNESS	±00 ———— (-10~+10)	±00
CONTRAST	CONTRAST	±00 ———— (-10~+10)	±00
POSITION		H±000 (±127)	±000
		V±000 (±127)	±000
PHASE		00 (0~19)	00
H SIZE		±00 (±64)	±00
AUTO		✔ H SIZE	yes
		✔ POSITION	yes
		✔ PHASE	yes
		GAIN	no
MAC MODE		On=MAC has priority	off
		Off=VESA has priority
GAIN		R ±00 (±64)	R ±00
		G ±00 (±64)	G ±00
		B ±00 (±64)	R ±00
	COLOR	±00 ———— (-10~+10)	±00
	TINT	±00 ———— (-10~+10)	±00
	SHARPNESS	±00 ———— (-10~+10)	±00
	GAMMA	±00 ———— (-10~+10)	±00
	SCAN MODE	Movie (video)	movie
		Photo (still photo)
	VCR MODE	On (VCR mode)	Off
		Off (normal)

✔Note

•TINT cannot be adjusted with a PAL, M-PAL or SECAM video signal input.

•TINT, COLOR and SHARPNESS cannot be adjusted with an RGB signal input.

•V. POSIT, H. POSIT, H. PHASE and H. SIZE cannot be adjusted with a VIDEO signal input.

•Menu operation is not possible during magnify or freeze functions.

14 3M™ Multimedia Projector MP8780 © 3M 1999