English

3MPocket Projector MPro150

Connecting to a Component Video Device

For component video input, you must purchase the optional 3M MPro150 Component AV Cable. This cable sends a higher quality video signal for the best possible image.

1Connect the component AV cable to the projector’s VGA-AV input.

2Connect the other end of the AV cable to the video device’s audio and video outputs.

Important Note: There are two red connectors on the Component AV cable. One is for the right audio channel and the other is for the Pr component video signal. Be careful to connect the red audio to red audio and red video to red video. If these connectors are switched, the projected image will appear green and an abnormal noise will come from the right speaker.

16

© 2010 3M. All Rights Reserved.

Page 16
Image 16
3M MPro150 manual Connecting to a Component Video Device