3MPocket Projector MPro150

Making Connections

The 3M MPro150 projector will display informational icons depending on the input device and signal being detected. If no devices or input cables are connected to the projector, the home screen will display. The 3M MPro150 was designed to operate with the 3M VGA and AV cables only.

Connecting to a Composite Video Device

Use the AV cable to input video from camcorders, digital cameras, DVD players and digital media players into the VGA-AV input on the projector.

1Connect the AV cable to the projector’s VGA-AV input.

2Connect the other end of the AV cable to the video device’s audio and video outputs.

English

Tip: Some video devices do not have the standard audio and video connections and may require an AV cable specified by the manufacturer. The AV cable allows you to connect your video device to your TV monitor or your projector and may be purchased from

the video device manufacturer. Once you have the AV cable, use the cable adapters to connect the video device cable and the projector cable.

© 2010 3M. All Rights Reserved.

15

Page 15
Image 15
3M MPro150 manual Making Connections, Connecting to a Composite Video Device