3M X66 manual Aspect, Auto, Keystone, Execute, Picture Mode

EASY MENU

EASY MENU

From the EASY MENU, items shown in the table below can be performed.

Select an item using the ▲/▼ cursor buttons. Then perform it according to the following table.

Item		Description
ASPECT	Using the ◄/► buttons switches the mode for aspect ratio.
	See the ASPECT item in IMAGE menu (29).
AUTO	Using the ► button executes the auto keystone function.
KEYSTONE
	See AUTO KEYSTONE EXECUTE item in SETUP menu (34).
EXECUTE
KEYSTONE	Using the ◄/► buttons corrects the vertical keystone distortion.
	See KEYSTONE	item in SETUP menu (34).

Using the ◄/► buttons switches the picture mode.

The picture modes are combinations of GAMMA and COLOR TEMP settings. Choose a suitable mode according to the projected source.

	NORMAL ó CINEMA ó DYNAMIC ó BOARD(BLACK)
	DAYTIME ó WHITEBOARD ó BOARD(GREEN)
		COLOR TEMP	GAMMA
	NORMAL	#2 MID DEFAULT	#1 DEFAULT
PICTURE MODE	CINEMA	#3 LOW DEFAULT	#2 DEFAULT
	DYNAMIC	#1 HIGH DEFAULT	#3 DEFAULT
	BOARD(BLACK)	#4 Hi-BRIGHT-1 DEFAULT	#4 DEFAULT
	BOARD(GREEN)	#5 Hi-BRIGHT-2 DEFAULT	#4 DEFAULT
	WHITEBOARD	#2 MID DEFAULT	#5 DEFAULT
	DAYTIME	#6 Hi-BRIGHT-3 DEFAULT	#6 DEFAULT

•When the combination of GAMMA and COLOR TEMP differs from pre-assigned modes above, the display on the menu for the PICTURE MODE is “CUSTOM”. Please refer to GAMMA (26) and COLOR TEMP (26) items in PICTURE menu.

•When this function is performed, a certain extra such as a line may appear.

(continued on next page)

24