SCREEN Menu
SCREEN Menu (continued)
Item
Description
| Using the ▲/▼ buttons turns on/off the message function. |
| TURN ON ó TURN OFF |
| When the TURN ON is selected, the following message function works. |
| “AUTO IN PROGRESS” while automatically adjusting |
| “NO INPUT IS DETECTED” |
| “SYNC IS OUT OF RANGE” |
| “Searching…” while searching for the input |
MESSAGE | “Detecting…” while an input signal is detected |
| The indication of the input signal displayed by changing |
| The indication of the aspect ratio displayed by changing |
| The indication of the PICTURE MODE displayed by changing |
| The indication of the MY MEMORY displayed by changing |
| The indication of “FREEZE” and “II” while freezing the screen by |
| pressing FREEZE button. |
| • When TURN OFF is selected, please remember if the picture is |
| freezing. Do not mistake freezing for a malfunction (21). |
Each input port for this projector can have a name applied to it.
(1)Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► button. The SOURCE NAME menu will be displayed.
(2)Use the ▲/▼ buttons on the SOURCE NAME menu to select the port to be named and press the ► button. Right side of the menu is blank until a name is specified. The SOURCE NAME dialog will be displayed.
(3)The current name will be displayed on the first line. Use the ▲/▼/◄/► buttons and the ENTER or INPUT button to select and enter characters. The RESET button can be used to
SOURCE NAME erase 1 character at a time. The name can be a maximum of 16 characters.
(4)To change an already inserted character, press the ▲ button while the cursor is on the
(5)Select 
and press ENTER or INPUT buttons when finished entering text.
To revert to the previous name without saving changes press the ESC or ◄ button and the INPUT button simultaneously.
39
