3M X66 INPUT Menu (continued)

33

INPUT Menu

Item Description

RESOLUTION

The resolution for the COMPUTER IN1 and IN2 input signals can

be set on this projector.

(1) In INPUT menu select RESOLUTION using the ▲/▼ buttons

and press the ► button.

The RESOLUTION menu will be displayed.

(2) In the RESOLUTION menu, select

the resolution you wish to display using

the ▲/▼ buttons.

Selecting AUTO will set a resolution

appropriate to the input signal.

(3) STANDARD

Pressing the ► or ENTER button when

selecting a STANDARD resolution will

automatically adjust the horizontal and

vertical positions, clock phase and

horizontal size and automatically select an

aspect ratio.

(3) CUSTOM

(3)-1 To set a custom resolution use the

▲/▼ buttons to select the CUSTOM

and the CUSTOM RESOLUTION

box will be displayed. Set the

horizontal (HORZ) and vertical

(VERT) resolutions using the ▲

/▼/◄/► buttons. Although not all

resolutions are guaranteed.

(3)-2 To save the setting place the

cursor on the right-most digit and

press the ► button.

The horizontal and vertical positions,

clock phase and horizontal size will

be automatically adjusted and an

aspect ratio will be automatically

selected.

(3)-3 To revert back to the previous

resolution without saving changes

place the cursor on the left-most

digit and press the ◄ button.

The screen will then return to the

RESOLUTION menu displaying the

previous resolution.

• For some pictures, this function may not work well.

INPUT Menu (continued)

STANDARD

↓

CUSTOM

↓

Contents

Main Digital Projector X66 Operator's Guide About this manual Content Fastening the lens cover 1. 2. Projector features Preparations Contents of package Part names Projector Control panel Rear panel Remote control Setting up Install the projector according to the environment and manner the projector will be used in. On a horizontal surface Suspended from the ceiling Arrangement Page Page Connecting your devices Connecting your devices (continued) Connecting power supply 1. 2. Using the security bar and slot Putting batteries 1. 2. 3. Remote control About the remote control signal Using as a simple PC mouse & keyboard Changing the frequency of remote control signal NOTE Turning on the power 1. 2. 3. CAUTION A strong light is emitted when the projectors power is on. Do Power on/off 1. 2. 3. Selecting an input signal 1. Adjusting the volume 2. Temporarily muting the sound 1. Operating Searching an input signal 1. Selecting an aspect ratio 1. Adjusting the zoom and focus 1. 2. Adjusting the projector's elevator 1. 2. 3. 4. 5. Adjusting the position 1. 2. Using the automatic adjustment feature 1. Using the magnify feature 1. 2. Correcting the keystone distortions 1. 2. Temporarily blanking the screen 1. Freezing the screen 1. 1. 2. 4. 3. Using the menu function 2. 3. 4. 5. EASY MENU EASY MENU (continued) PICTURE Menu PICTURE Menu (continued) To adjust CUSTOM function in GAMMA and COLOR TEMP PICTURE Menu (continued) IMAGE Menu From the IMAGE menu, items shown in the table below IMAGE Menu (continued) INPUT Menu Page INPUT Menu (continued) SETUP Menu From the SETUP menu, items shown in the table below SETUP Menu (continued) SCREEN Menu From the SCREEN menu, items shown in the table below Page Page Page OPTION Menu Page Page Page Page 1. Using Security Features 1.1 Inputting the PASSWORD 1.2 Changing the PASSWORD (continued) 1.3 If you have forgotten your PASSWORD 2. Using the MyScreen PASSWORD Function 2.1 Turning on the MyScreen PASSWORD Function 2.2 Setting the PASSWORD 3. Using the PIN LOCK Function Page (continued) 4. Using the Transition Detector Function 4.1 Turning On the Transition Detector Function 4.2 Setting the Transition Detector PASSWORD Page Maintenance Lamp 1. Turn the projector off, and unplug the power cord. 2. 3. 4. 5. 6. 7. Lamp warning HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE 1. 2. 3. 4. 5. 1. 2. 1. 2. Other care Troubleshooting Related messages Regarding the indicator lamps The projector is in a standby state. The projector is warming up. The projector is in an on state. The projector is cooling down. Shutting the projector down Resetting all settings Phenomena that may be easy to be mistaken for machine defects Phenomena that may be easy to be mistaken for machine defects (continued) Specications Specication Item Specication