A&D TM-2655P manual Setting the Functions, Function Setting Mode

7. SETTING THE FUNCTIONS

7-1 Function Setting Mode

The TM-2655/TM-2655P is provided with various functions, which allow the user to set the device to suit the user’s requirements. The functions are set in the function setting mode. The function setting mode display and switches used are as shown below:

Fig.12 Switches for setting the function and the function setting mode display

Table 4 Switches for setting the functions

switch and SELECT switch	Hold down the switch and press the SELECT switch to
	enter the function setting mode.
COUNTER switch	Press to select the function to set.
switch	Press to select the function parameter.

1.Hold down the switch and press the SELECT switch. “f01” appears in the SYSTOLIC pressure display. This indicates that the monitor is now in the function setting mode.

2.Press the COUNTER switch to select the function number to set. Each time the switch is pressed, the funciton number changes: from “f01” to “f02” to “f03”.

3 Press the switch to select the function parameter.

4. When the settings are complete, turn the power off and turn it on again. The settings are saved.

14