Week program setting the switch- on time | A.O. Smith BFC - 30, BFC

gis

The display shows the menu for the week program, see the figure below. With the default setting, the program switches on and off every day at 00:00 and 23:59 hours respectively, the water temperature is 65°C and the pump is switched on (P).

	DAY TIME Tset
ON »SU		00:00 65ÉC P
OFF SU		23:59
ON	MO	00:00 65ÉC P

OFF	MO	23:59
ON	TU	00:00 65ÉC P
OFF	TU	23:59
ON	WE	00:00 65ÉC P
OFF	WE	23:59
ON	TH	00:00 65ÉC P
OFF	TH	23:59
ON	FR	00:00 65ÉC P
OFF	FR	23:59
ON	SA	00:00 65ÉC P
OFF SA		23:59
	INSERT

DELETE

START OPERATION

Example

As an example, we will set the switch-on time for Sunday to 08:15 hours, and the matching switch-off time to 12:45 hours. The water temperature will be set to 75 °C and the pump will run continuously.

The following settings are entered one by one via the menu: the switch-on time, the switch-off time, the desired water temperature, and the mode of the program-controlled pump.

11.7.1Week program: setting the switch- on time

1.Bring the cursor to SU

Confirm with .

ON	»SU 00:00
OFF	SU 23:59
Tset	65ÉC
PUMP	ON	SAVE

The day indicated by » flashes.

2.Use and to set the desired day. In the example this is SU (Sunday).

Confirm with .

ON	SU»00:00
OFF	SU 00:59
Tset	65ÉC
PUMP	ON	SAVE

The cursor moves to the hour digits, which flash.

3.Use and to set the hours. In the example, this is 08.

Confirm with .

The cursor moves to the minute digits, which flash.

ON	SU 08»00
OFF	SU 08:00
Tset	65ÉC
PUMP	ON	SAVE

Note

Because the switch-off time can never be earlier than the switch-on time, the switch-off time setting is automatically adjusted with the switch-on time.

4.Use and to set the minutes. In the example, this is 15.