A.O. Smith BFC - 60, BFC - 30 service manual Week program setting the program- controlled pump

11 Main menu

11.7.4Week program: setting the program- controlled pump

1.If required, a pump can be controlled during the period. Use and to set PUMP ON . The pump ensures a regular circulation of hot water in the hot water pipes. You can skip this step if you there is no pump in your hot water circuit.

Confirm with	.
The cursor moves to	SAVE.

ON SU 08:15

OFF SU 12:45

Tset 75ÉC

PUMP»ON SAVE

2.Confirm with .

The display shown in the figure will appear.

	DAY	TIME	Tset
ON »SU		08:15	75ÉC P
OFF	SU	12:45
ON	MO	00:00	65ÉC P
OFF	MO	23:59
ON	TU	00:00	65ÉC P
OFF	TU	23:59

3.If you wish, you can use to scroll to another day, and change more switch-on times (11.7.1 "Week program: setting the switch-on time") and switch- off times (11.7.2 "Week program: setting the switch-off time").

4.After changing all desired switch-on and switch off times, you can start running the week program:

Scroll with to START OPERATION.

Confirm with .

11.8 Adding times to a week program

Call up the menu to INSERT switch-on and switch-off times into a week program as follows:

1.: WEEK PROGRAM PROGRAM OVERVIEW.

Confirm with .

WEEK PROGRAM START OPERATION

^»PROGRAM OVERVIEW

È

gis

The display shows the menu for the week program. The cursor points to the active period.

DAY TIME Tset

ON »SU 08:15 75ÉC P

OFF SU 12:45

ON MO 00:00 65ÉC P

....................

....................

OFF SA 23:59

INSERT

DELETE

START OPERATION

2. Scroll to INSERT.

Confirm with .

The sub-menu for adding a period will appear.

ON	»SU	08:15
OFF	SU	12:45
Tset	75ÉC
PUMP	ON	SAVE

Example

As an example, we will program an extra period in which the switch-on time is set to 18:00 hours, and the corresponding switch-off time to 22:00 hours. The water temperature will be set to 75 °C and the pump will run continuously.

DAY TIME Tset

ON »SU 18:00 75ÉC P

OFF SU 22:00

ON MO 00:00 65ÉC P

OFF MO 23:59

....................

....................

OFF SA 23:59

INSERT

DELETE

START OPERATION

3.Proceed as follows:

a.Set the switch-on time (11.7.1 "Week program: setting the switch-on time").

b.Set the switch-off time (11.7.2 "Week program: setting the switch-off time").

c.Set the water temperature (11.7.3 "Week program: setting the water temperature").

d.Set the program-controlled

pump (11.7.4 "Week program: setting the program-controlled pump").

5.To activate the week program with the new period added, scroll down with to

START OPERATION and confirm with .

62 Instruction manual BFC