A.O. Smith fps50 Part Information, Closes at .3 PSI Closes at .3 PSI Unavailable at this time

FPS/FPSE/FPD TECHNICAL TRAINING AND SERVICE WORKBOOK

PART INFORMATION

CONTROL MODELS

Fan	FPS40-50
	FPSE & FPD40 - 50
	FPS75
Air Pressure	FPS40-50
Switch	FPSE & FPD40 - 50
	FPS75
Thermostat	FPS40-50
	FPSE & FPD40 - 50
	FPS75
High Limit	FPS40-50
	FPSE & FPD40 - 50
	FPS75
Gas Valve	FPS40-50
	FPSE & FPD40 - 50
	FPS75
Pilot	FPS40-50
	FPSE & FPD40 - 50
	FPS75
Gas Pressure	FPS40-50
Switch
Vent High Limit	FPS75
Vent Material	All models

SPECIFICATION

Draws.75 amp, Turns at 3325 RPM

Draws.75 amp, Turns at 3325 RPM

Draws 1.8 amp, Turns at 3000 RPM

Closes at .3 PSI

Closes at .3 PSI

Unavailable at this time

Temperature range no lower limit to 1600 Temperature range 1100 - 1500

Temperature range 1200 - 1600

Opens at 1950

Opens at 1600

Opens at 1950

operating pressure - natl. 3.5" W.C.,I.p. 10" w.c. operating pressure - natl. 3.5" W.C.,I.p. 10" w.c.

operating pressure - natl. 3.5" W.C., I.p. 101'w.c

Standing pilot

1.1.0.Draws 1.63 amps

1.1.0.Draws 1.63 amps

Closes at 2.5" w.c. for natural

Closes at 6.5" w.c. for propane

Opens at 1900closes at 1500

PVC (Class 160, ASTM 0-2241; Schedule 40, ASTM 0-1785, or Cellular Core Schedule 40 OWV, ASTM F-891), Schedule 40 CPVC (ASTM F-441), or ASS (ASTM 0-2661) pipe. The fittings other than the TERMINATION TEE, should be equivalent to PVC_OWV fittings meeting ASTM 0-2665 (Use CPVC fittings, ASTM F-438 for CPVC pipe and ASS fittings, ASTM 0-2661/3311 for ASS pipe. If CPVC or ASS pipe and fittings are used, then the proper cement must be used for all joints, including joining the pipe to the Termination Tee (PVC Material).

@1995
A.D. Smith	96	Technical Information
Water Products Co		Irving,Texas