Aastra Telecom 57I CT, 55I manual Incoming Call Interrupts Dialing Feature

	SIP IP Phone Models 53i, 55i, 57i, 57i CT Release Notes
	Enhancements/Changes in 2.0.2, Build 1040
Issue Number	Description of Feature/Enhancement
ENH05218	Incoming Call Interrupts Dialing Feature
	A User and Administrator can now configure whether or not an incoming call
	interrupts an outgoing call that is dialing. A new parameter has been added
	(“incoming call interrupts dialing”) to control this feature.
	When you enable this parameter (1 = enable), an incoming call interrupts the
	outgoing call during dialing and allows the phone to ring for the user to answer the
	incoming call. This was the existing default behaviour in previous releases, and is
	also the behaviour of this parameter in 2.0.2 if it is enabled.
	IMPORTANT NOTE: If you disable this parameter, the behaviour of the phone has
	changed in 2.0.2. In 2.0.2, this feature performs as follows if disabled:
	When you disable the “incoming call interrupts dialing” parameter (0 = disable),
	which is the default, the phone does not interrupt the outgoing call during dialing and
	instead rings the incoming call on another free line (or sends busy signal if all
	remaining lines are busy). You have a choice to ignore the incoming call, or answer
	the incoming call on another line, via the Ignore and Answer softkeys that display. If
	you choose to answer the incoming call, you can answer the call, finish the call, and
	then hang up. You can still go back to the original outgoing call and finish dialing out.

Notes:

1.On a 53i, you must use the down arrow key to ignore the call. To answer the call you must press the line key where the call is coming in.

2.For all models, if you disable this parameter (0=disable), and the phone receives an incoming call while you are dialing an outgoing call, you can pick up the call and perform transfer or conference as required.

An Administrator can set this parameter using the configuration files (incoming call interrupts dialing) or the Aastra Web UI (Incoming Call Interrupts Dialing) at Basic Settings->Preferences->General). A User can set this parameter using only the Aastra Web UI.

Incoming Call Interrupts Dialing (in Web UI) (Default is disabled.)

RN-001029-00, Release 2.0.2, Rev 02 11