Aastra Telecom 55I, 57I CT manual Allow Barge In Feature

IP Phone Release Notes 2.0.2

Enhancements/Changes in 2.0.2, Build 1040

Issue Number	Description of Feature/Enhancement
DEF04929	Pressing a speeddial key while on an active call no longer places that call on hold.
	When there is an active call, the speeddial key now sends DTMF digits through the
	active voice path. For example, if you are on an active call, and a speeddial key is
	configured on a different line to access your voicemail, you must put the active call
	on hold and then press the speeddial key to access your voicemail on the other line.
DEF05224	The “Action URI Registered” is now executed on the first successful registration of
	each unique line configured on the phone.
DEF05722	Increased the length of the stuttered dial tone used to indicate message waiting.
DEF05964	Usernames containing dots (“.”) are now supported.
ENH05637	The IP phones no longer support the alpha character in the password.
	Non-numeric passwords are ignored in release 2.0.2 and all subsequent releases.
	The default password is used instead.
ENH06153	Allow Barge In Feature
	A User and Administrator can now configure a “barge-in” feature on the phone.
	A new parameter has been added (“sip intercom allow barge in”) which controls
	how the phone handles an incoming intercom call when an active call is in progress.
	When you enable this parameter (1 = enable), which is the default value, an
	incoming intercom call takes precedence over any active call, by placing the active
	call on hold and automatically answering the intercom call. When you disable this
	parameter (0 = disable), and there is an active call, the phone treats an incoming
	intercom call like a normal call and plays the call warning tone.
	An Administrator can set this parameter using the configuration files (sip intercom
	allow barge in) or the Aastra Web UI (Allow Barge In at Basic
	Settings->Preferences->Incoming Intercom Settings). A User can set this parameter
	using only the Aastra Web UI.

	Allow Barge In (in Web UI) (Default is enabled.)
ENH06301	REFER-TO header now uses uppercase characters in escape codes.
12	RN-001029-00, Release 2.0.2, Rev 02