SIP IP Phone Models 53i, 55i, 57i, 57i CT Release Notes
New Parameters Added in 2.0.2
New Parameters Added in 2.0.2
These parameters were described in the previous section (“Enhancements/ Changes in 2.0.2, Build 1040”) and are repeated here for your convenience. These parameters have been incorporated into the
Release 2.0.2 Administrator’s Guide.
Incoming Call Interrupts Dialing
Parameter – | Aastra Web UI: | Basic |
incoming call interrupts | Configuration Files | aastra.cfg, <mac>.cfg |
dialing |
|
|
Incoming Call Interrupts |
|
|
Dialing |
|
|
(in Web UI) |
|
|
|
| |
Description | Enable or disables how the phone handles incoming calls while the phone | |
| is dialing out. |
|
| When you enable this parameter (1 = true), an incoming call interrupts the | |
| outgoing call during dialing and allows the phone to ring for the user to | |
| answer the incoming call. | |
| When you disable this parameter (0 = fales), which is the default, the | |
| phone does not interrupt the outgoing call during dialing and instead rings | |
| the incoming call on another free line (or sends busy signal if all | |
| remaining lines are busy). You have a choice to ignore the incoming call, | |
| or answer the incoming call on another line. If you choose to answer the | |
| incoming call, you can answer the call, finish the call, and then hang up. | |
| You can still go back to the original outgoing call and finish dialing out. | |
| On the 5i Series Phones: | |
| If you disable this parameter (0=false), and the phone receives an | |
| incoming call while you are dialing an outgoing call, you can pick up the | |
| call and perform transfer or conference as required. | |
| Note: After enabling or disabling this feature, it takes affect on the phone | |
| immediately. |
|
|
|
|
Format | Boolean |
|
|
|
|
Default Value | 0 (false) |
|
|
|
|
Range | 0 (false) |
|
| 1 (true) |
|
|
| |
Example | incoming call interrupts dialing: 1 | |
|
|
|
|
|
|
27 |
