Aastra Telecom ATP-CNX-020 setup guide Connect to the console, Local connection

Aastra CNX Quick Installation and Setup Guide

Procedures

Connecting to the console port
3	Connect to the console
You can access the Aastra CNX console locally or remotely. Ensure that you		Console port parameters
configure your terminal or PC (terminal emulator) console port parameters.
			Parameter	Value
Local connection
			Baud rate	9600
To connect a local PC or terminal:			Flow control	None
a. Attach the 9-pin male DB-9 connector on the serial cable to the			Data bits	8
female console port on the rear panel of the Aastra CNX.			Stop bits	1
b. Attach the 9-pin female connector on the serial cable to the male console			Parity	None

port on the back of your PC or terminal.

Remote connection

To connect a remote PC and an Aastra CNX to an Ethernet LAN:

a.Attach one end of an Ethernet cable to the Ethernet port on the PC, and the other end to a LAN port.

b.Attach one end of an Ethernet cable to an Ethernet port on the back panel of the Aastra CNX, and the other end to a LAN port.

To connect a modem:

a.Attach the 9-pin male connector on the serial cable to the female console port on the rear panel of the Aastra CNX.

b.Attach a 25-pin male connector on the modem cable to the modem's DB-25 RS-232 port.

DB-9 port on PC PC or terminal

Aastra CNX

		T1 / E1					10/100 ENET
1	2	3	4	CONSOLE	RESET	1	2

100-240VAC

1.0A 47-63HZ

Ethernet LAN

Console port

DB-9 to DB-9 console cable Modem (AT or Hayes compatible)

DB-25 RS-232 port

To console port
on Aastra CNX	DB-9 to DB-25 modem cable

4 ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06