Aastra Telecom ATP-CNX-020 setup guide Run network and time configuration, Step Action

Aastra CNX Installation and Setup Procedures

Procedures

(1) Run network and time configuration

Use the following procedure to initially configure the network settings on the Aastra CNX hardware.

Step	Action
1	After first-time power up of the CNX, the following displays in a terminal window:
	Welcome to the
	Aastra CNX - Conference Bridge
	Configuration Utility
	- please press <enter> to continue -
2	Press <Enter>.
	The following displays:
	Hostname:
3	Enter the hostname for the Aastra CNX and press <Enter>. For example:
	Hostname: cnx1 ↵
	The following displays:
	Configuring ENET #1...
	IP Address:
4	Enter the IP address for the Ethernet port for which you want to use as a management interface, and
	press <Enter>. For example:
	IP Address: 192.168.2.6 ↵
	The following displays:
	Netmask:
5	Enter the Netmask for the Ethernet port for which you want to use as a management interface, and
	press <Enter>. For example:
	Netmask: 255.255.255.0 ↵
	The following displays:
	Default Gateway:
	(continued)

ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 9