Aastra Telecom ATP-CNX-020 setup guide Connect the power cable, Connecting the AC power cable

Aastra CNX Quick Installation and Setup Guide

Procedures

Connecting the AC power cable

5 Connect the power cable

Ground the chassis

a.Locate the 3-hole, female, power receptacle on the rear of the chassis.

b.Plug the male, 3-prong connector on the power cable into the power receptacle.

c.Insert the plug at the other end of the power cable into a grounded power source (100 to 240 VAC).

NOTE: North America: 120 V at 15 A

Europe: 240 V at 10 A

		T1 / E1					10/100 ENET
1	2	3	4	CONSOLE	RESET	1		2

100-

1.0A

AC power cord

Connect to a grounded 15 A power source (100 to 240 VAC). (North America: 120 V at 15 A) (Europe: 240 V at 10 A)

6 ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06