Aastra Telecom ATP-CNX-020 setup guide Connect network cables, Connecting the network cables

Aastra CNX Installation and Setup Procedures

Procedures

Connecting the network cables

4 Connect network cables

Make sure you have the network cables that you need for your facility, and connect them to the following interfaces as appropriate:

T1/E1 Connect the RJ-48C T1/E1 cable(s) to the RJ-48C T1/E1 port(s) on the rear panel of the Aastra CNX .

Ethernet Connect the RJ-45 Ethernet UTP cable(s) to the RJ-45 10/100 ENET port(s) on the rear panel of the Aastra CNX.

		T1 / E1					10/100 ENET
1	2	3	4	CONSOLE	RESET	1	2

100-240VAC

1.0A 47-63HZ

T1/E1 RJ-48C	Ethernet RJ-45
connectors	connectors

ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 5