Aastra Telecom CT9143i manual Configuring Preferred Line Focus via the Configuration Files

IP Phone Release Notes 2.3

New Features in Release 2.3

Phone Feature	Preferred Line Focus Behavior
caller id	If the "Switch UI Focus To Ringing Line" parameter is disabled,
	the User is able to see the Caller ID when the phone switches the
	focus to the ringing line.
factory default	Factory default and recovery mode clears the "preferred line" and
	"preferred line timeout" parameters, and the phone operates in a
	non-preferred line mode.

Notes:

1. If you specify a value of “0” for the preferred line parameter, it disables the preferred line focus feature. The phone behaves as in previous releases.

2.If you specify a value of “0” for the preferred line timeout parameter, the phone returns the line to the preferred line immediately.

Configuring Preferred Line Focus via the Configuration Files

Use the following parameters to configure preferred line focus using the configuration files.

Parameter–	Configuration Files	aastra.cfg, <mac>.cfg
preferred line	Aastra Web UI	Basic Settings->Preferences->General
Preferred Line
(in Web UI)
Description	Specifies the preferred line to switch focus to when incoming or outgoing
	calls end on the phone.
Format	Integer
Default Value	1
Range	0 (none - disables the preferred line focus feature)
	1 to 9
Example	preferred line: 2
Parameter–	Configuration Files	aastra.cfg, <mac>.cfg
preferred line timeout	Aastra Web UI	Basic Settings->Preferences->General
Preferred Line Timeout
(seconds)
(in Web UI)
Description	Specifies the time, in seconds, that the phone switches back to the preferred
	line after a call (incoming or outgoing) ends on the phone, or after a duration
	of inactivity on an active line.
Format	Integer
Default Value	0 (the phone returns the line to the preferred line immediately)
Range	0 to 999
Example	preferred line timeout: 30

50 RN-001029-02, Release 2.3, Rev 00