2-12

Chapter 2

 

 

(6). IEEE1 Header: IEEE 1394 Header (For AT7 Full Version Only)

This header is reserved for connection to the ABIT Media XP product (Optional). The Media XP can provide the total solution for the front panel connections. It provided a various function, like a: SD/MS/CF card reader, USB 2.0/IEEE 1394 connectors, S/PDIF-Out connector and MIC/Earphone connectors. They all designed on one 5.25” diskette size panel, can fit on the chasses front panel 5.25” diskette slot.

For detailed information of ABIT Media XP, please see its user’s manual.

Note: Watch the pin position and the orientation

Note

You don’t need to install any additional drivers for IEEE 1394 devices. The newest operation system will fully support this feature. For example: Windows® 2000, Windows® XP, etc.

(7). CCMOS1 Header: CMOS Discharge Jumper

Jumper CCMOS1 used to discharge CMOS memory. When you install the motherboard, make sure this jumper is set for normal operation (pin 1 and 2 shorted). See figure below.

Note: Watch the pin position and the orientation

AT7/AT7E