USB 2.0 Drivers Installation for Windows® 2000

D-1

 

 

Appendix D. USB 2.0 Drivers Installation for Windows® 2000

After you’ve installed VIA chipset drivers, you will need to install the USB 2.0 drivers. Step by step instructions on how to do this are found in the following section.

Note

Details of the Windows® 2000 operating system will not be mentioned in this manual. If you have any problems with Windows® 2000 installation, operations, or settings, please refer to your Windows® 2000 user's manual or other databases provided by Microsoft® Corporation.

Insert the AT7 series CD into your CD-ROM drive, and it should execute the program automatically. If not, you can go to the CD location and execute the execution file at the main directory of the CD. After it has been executed you will see the screen below.

Step 1: Move the cursor to “USB 2.0 Driver” and click on it. You will go to the next screen.

Step 3: You will now see the welcome screen and its dialogue box. Click “Next>” to go on.

Step 2: The “InstallShield Wizard” shows up, and it will go to the next screen for a while.

Step 4: Choose “Install USB Driver”, then click “Next>” to go on.

User’s Manual