1-4

Chapter 1

 

 

#Supports Wake On LAN, Modem, but your ATX power supply 5V standby power must be able to provide at least a 720mA current capacity. Otherwise, the functions may not work normally.

#HPT 374 IDE controller is designed to support high-speed and high performance mass storage devices. Thus we suggest that you don’t connect non-disk devices that use ATA/ATAPI interfaces, such as CD-ROM to HPT 374 IDE connector (IDE3, IDE4, IDE5 and IDE6). (For AT7 full version only)

#This motherboard supports the standard bus speeds of 66 MHz/100 MHz/133 MHz that are used by specific PCI, processor and chipset specifications. Exceeding these standard bus speeds is not guaranteed due to the specific component specifications.

#Specifications and information contained in this manual are subject to change without notice. Note

All brand names and trademarks are the property of their respective owners.

1-3. Item Checklist

Check that your package is complete. If you discover any damaged or missing items, please contact your retailer or dealer.

∃One ABIT AT7 or AT7E motherboard

∃Three 80-wire/40-pin ribbon cable for master and slave Ultra DMA 133, Ultra DMA 100, Ultra DMA 66 or Ultra DMA 33 IDE devices

∃One ribbon cable for 3.5” floppy disk devices

∃One compact disc for support drivers and utilities

∃One USB cable (For USB 1.1 used)

∃One DIY bag

∃One user’s manual for the motherboard

∃One floppy disk of HPT 374 drivers (AT7 Full Version Only)

∃One I/O shield

AT7/AT7E