2. BIOS Setup
This motherboard provides a programmable EEPROM so that you can update the BIOS utility. The BIOS (Basic Input/Output System) is a program that deals with the basic level of communication between processor and peripherals. Use the BIOS Setup program only when installing motherboard, reconfiguring system, or prompted to “Run Setup”. This chapter explains the Setup Utility of BIOS utility.
After powering up the system, the BIOS message appears on the screen, the memory count begins, and then the following message appears on the screen:
PRESS DEL TO ENTER SETUP
If this message disappears before you respond, restart the system by pressing <Ctrl> + <Alt>
+<Del> keys, or by pressing the Reset button on computer chassis. Only when these two methods fair should you restart the system by powering it off and then back on.
After pressing <Del> key, the main menu screen appears.
CMOS Setup Utility – Copyright (C)
BIOS Setup
►Standard CMOS Setup
►Advanced Setup
►Features Setup
►Power Management Setup
►PCI/PnP and Play Setup
►BIOS Security Features
►CPU PnP Setup
►Hardware Monitor
Load Optimal Defaults
Save Changes and Exit
Discard Changes and Exit
:Move Enter:Select
F1:General Help F9:Optimized Settings
Standard CMOS setup for changing time, date, hard disk type, etc.
V02.59 (C)Copyright
※In order to increase system stability and performance, our engineering staff is constantly improving the BIOS menu. The BIOS setup screens and descriptions illustrated in this manual are for your reference only, and may not completely match with what you see on your screen.
|
