Manuals / Abit / Computer Equipment / Computer Hardware

Abit IS-11, IS-12 BIOS Setup, No Errors The system-boot will not stop for any error detected

Models: IS-12 IS-10 IS-11 IS-20

1 56

Download 56 pages 30.77 Kb

Page 31

[No Errors]: The system-boot will not stop for any error detected.

BIOS Setup	3-5

[All Errors]: The system-boot will stop whenever the BIOS detect a non-fatal error.

[No Errors]: The system-boot will not stop for any error detected.

[All, But Keyboard]: The system-boot will stop for all errors but keyboard error.

[All, But Diskette]: The system-boot will stop for all errors but disk error.

[All, But Disk/Key]: The system boot will stop for all errors but disk or keyboard error.

Base Memory

This item displays the amount of base memory installed in the system. The value of the base memory is typically 640K for system with 640K or more memory size installed on the motherboard.

Extended Memory

This item displays the amount of extended memory detected during system boot-up.

Total Memory

This item displays the total memory available in the system.

User’s Manual

Image 31

Abit IS-11, IS-12 BIOS Setup, No Errors The system-boot will not stop for any error detected, Base Memory, Extended Memory

Contents

Intel Pentium 4 System Board Socket User’s Manual IS-10/IS-11/IS-12/IS-204200-0383-03 Rev Copyright and Warranty Notice Table Of Contents Hardware SetupChapter IntroductionChapter Driver InstallationAppendix A. How to Get Technical Support BIOS SetupChapter 1. Introduction 1.1. Features & SpecificationsChapter Internal I/O ConnectorsExternal I/O Connectors MiscellaneousIntroduction 1.2. LayoutUser’s Manual 1.3. Jumpers & Connectors Description 2.1. Install The Motherboard Chapter 2. Hardware Setup2.2. Install Pentium 4 CPU and Heatsink Supporting-Base 2.3.1. Memory Configuration Table 2.3. System Memory2.3.2. Installing and Removing Memory Modules 2.4.1. ATX Power Connectors 2.4. Connectors, Headers, and Switches2.4.2. FAN Power Connectors This header uses a jumper cap to clear the CMOS memory Hardware SetupPin 1-2 shorted default Normal operation 2.4.3. CMOS Memory Clearing Header2.4.4. AGP Display Card Slot IS-10/IS-11/IS-12 This slot supports an optional AGP graphics card up to AGP 4X/8X modeIS-10 / IS-11 / IS-12 / IS-20 2.4.5. Front Panel Switches & Indicators Connection Headers 2.4.6. Front Panel Audio Connection Header These headers each provide two additional USB port connections Hardware Setup2.4.7. Additional USB Port Connection Headers 2-11This header provides one additional System Management Bus connection 2.4.8. System Management Bus Connection HeaderIS-10 / IS-11 / IS-12 / IS-20 2.4.9. Additional IEEE1394 Port Connection Headers IS-12 IS-10 / IS-11 / IS-12 / IS-20 2.4.10. Internal Audio Source Connectors2.4.11. Floppy and IDE Disk Drive Connectors These connectors each provide one Serial ATA channel connection 2.4.12. Serial ATA ConnectorsIS-10 / IS-11 / IS-12 / IS-20 2.4.13. CPU Core Voltage Selector Hardware SetupThis header uses a jumper to adjust the CPU core voltage Pin 1-2 shorted default Normal operation2.4.14. External I/O Panel Connectors Press DEL to run setup Chapter 3. BIOS SetupIS-10 / IS-11 / IS-12 / IS-20 3.1. Standard CMOS FeaturesDate mmddyy Time hhmmssWhen set to Auto, the BIOS will automatically check what kind of IDE drive you are using. If you want to define your own drive by yourself, set it to Manual and make sure you fully understand the meaning of the parameters. Refer to the manual provided by the device manufacturer to get the settings right Cylinder This item configures the numbers of cylinders Head Extended Memory BIOS SetupNo Errors The system-boot will not stop for any error detected Base Memory3.2. Advanced BIOS Features Page 3.3. Advanced Chipset Features Init Display First BIOS SetupThis option enables or disables the on-chip VGA controller AGP Aperture SizeOnboard IDE Device 3.4. Integrated PeripheralsSATA Only The SATA is operating in legacy mode BIOS SetupThis item enables or disables the onboard IDE-1 controller This item enables or disables the onboard IDE-2 controllerIS-10 / IS-11 / IS-12 / IS-20 Serial ATA Port1 Mode / Serial ATA Port2 ModeOnboard PCI Device SuperIO Device This item enables or disables the onboard FDD controller BIOS SetupKB Power ON Password Hot Key Power ONParallel Port Mode This item specifies the parallel port mode 3.5. Power Management Setup Wake-Up by PCI card/LAN 3.6. PnP/PCI Configurations 3-20 IRQ Resources Click Enter key to enter its submenuThis item sets each system interrupt to either PCI Device or Reserved IS-10 / IS-11 / IS-12 / IS-203.7. PC Health Status 3.11. Set User Password 3.8. Load Fail-Safe Defaults3.9. Load Optimized Defaults 3.10. Set Supervisor PasswordDriver Installation Chapter 4. Driver InstallationUser’s Manual 4.1. Setup Items User’s Manual Appendix A. How to Get Technical SupportHow to Get Technical Support sold the product to you firstIS-10 / IS-11 / IS-12 / IS-20 Appendix Aalt.comp.periphs.mainboard.abit comp.sys.ibm.pc.hardware.chips alt.comp.hardware.overclockingU.K. and Ireland North America and South AmericaFrance, Italy, Spain, Portugal, and Greece JapanShanghai RussiaThank You ABIT Computer Corporation How to Get Technical SupportUser’s Manual Technical Support Form Problem Description