- 21 -
Connect Select an item on the list and then click to make a
connection.
AP Information When you double click on the intended AP, you can see AP's detail information
that divides into four parts. They are General, WPS, CCX and 802.11n
information. The introduction is as following:
General
General information contain AP's SSID, MAC address,
Authentication Type, Encryption Type, Channel, Network
Type, Beacon Interval, Signal Strength and Supported
Rates.
Close: Click this button to exit the information screen.
WPS
WPS information contains Authentication Type, Encryption
Type, Config Methods, Device Password ID, Selected
Registrar, State, Version, AP Setup Locked, UUID-E and
RF Bands.