Accton Technology CheetahSwitch Workgroup, 4508 manual Snmp, Sta, Vlan

CheetahSwitch Workgroup-4508

Main Menu

Using the on-board Web agent, you can define system parameters, manage and control the switch and all its ports, or monitor network conditions. The figure to the right of the Main Menu and the following table briefly describe the selections available from this program.

Item	Description
System	Provides basic system description, including contact information.
Switch	Shows hardware/firmware version numbers and power status.
IP	Includes boot state, IP address, and Telnet session count.
SNMP	Configures communities and trap managers; and activates traps.
Security	Sets password for system access..
Upgrade	Downloads new version of firmware to update your system.
Address	Provides full address listing, sorted by address or port.
STA	Enables Spanning Tree Algorithm; also sets parameters for switch priority,
	hello time, maximum message age, and forward delay; as well as port
	priority and path cost.
Port	Enables any port and enables/disables flow control.
VLAN	Assigns switch ports to form up to 16 independent LAN groups.
Analyzer	Sets analysis and monitored port.
Statistics	Displays statistics on network traffic passing through the selected port.
Broadcast	Enables/disables broadcast suppression on a per-port basis. Also sets the
Storm Control	broadcast-rate threshold above which broadcast packets are discarded.
Apply	Implement the changes made to the current configuration menu.
Revert	Cancel changes made to current configuration menu (prior to pressing Apply).
Help	Help on using the Web management interface.

3-4