Accton Technology 4508, CheetahSwitch Workgroup Management Guide, Console Login Configuration

	Management Guide
Parameter	Description
IP Address	IP address of the trap manager.
Community Name	A community specified in the SNMP Communities table.
Status	Sets administrative status of entry to enabled or disabled.

Console Login Configuration

Use the Management Setup: Console Login Configuration to restrict management access based on specified user names and passwords, or to set the invalid password threshold and timeout. There are two user types, Administrator and Guest. Only the Administrator has write access for parameters governing the SNMP agent. You should therefore assign a user name and password to the Administrator as soon as possible, and store it in a safe place. (If for some reason your password is lost, or you can not gain access to the System Configuration Program, contact your Accton distributor for assistance.) The parameters shown on this screen are indicated in the following figure and table.

CheetahSwitch Workgroup - 4508
Console Login Configuration
Password Threshold		: 3
Lock-out Time (in seconds) : 0
User Type	User Name	Password
---------------------------------------
Admin :	admin
Guest :	guest
<APPLY>	<OK>	<CANCEL>
Use <TAB> or arrow keys to move, other keys to make changes.

Parameter	Default	Description
Password	3	Sets the password intrusion threshold which limits the number
Threshold		of failed logon attempts.
		(Range: 0~65535)
Lock-out Time	0	The time (in seconds) the management console will be
		disabled due to an excessive number of failed logon attempts.
		(Range: 0~65535)
Admin1	name: admin	Administrator has access privilege of Read/Write for all
	password: null	screens.
Guest1	name: guest	Guest has access privilege of Read Only for all screens.
	password: null

1: Passwords can consist of up to 15 alphanumeric characters and are not case sensitive.

2-13