Management Guide
2-3
Parameter Description
Port Information Displays operational status, including link state, flow control method,
speed and duplex mode.
Spanning Tree Configuration Enables Spanning Tree Algorithm; also sets parameters for hello time,
maximum message age, switch priority, and forward delay; as well as
port priority, path cost and Fast STA mode.
Spanning Tree Information Displays full listing of parameters for the Spanning Tree Algorithm.
Mirror Port Configuration Sets the source and target ports for mirroring.
IGMP Configuration Configures IGMP multicast filtering.
Broadcast Storm Control Sets the broadcast-rate threshold at which broadcast packets are
discarded.
Extended Bridge ConfigurationDisplays/configures extended bridge capabilities provided by this
switch.
802.1P Configuration Configures default port priorities and queue assignments.
802.1Q VLAN Base Displays basic VLAN information, such as VLAN version number,
Information maximum VLAN ID, maximum VLANs supported, and the current
number of VLANs configured.
802.1Q VLAN Current Displays VLAN groups and port members.
Table Information
802.1Q VLAN Static Configures VLAN groups via static assignments, including setting port
Table Configuration members, or restricting ports from being dynamically added to a port
by the GVRP protocol.
802.1Q VLAN Displays/configures port-specific VLAN settings, including PVID,
Port Configuration ingress filtering, and GVRP.
Network Monitor Menu
Port Statistics Displays statistics on network traffic passing through the selected port.
RMON Statistics Displays detailed statistical information for the selected port such as
packet type and frame size counters.
Unicast Address Table Provides full address listing, as well as search and clear functions.
IP Multicast Registration Table Displays all the multicast groups active on this switch, including
multicast IP addresses and corresponding VLAN IDs.
Static Unicast Address Table Used to manually configure host MAC addresses in the unicast table.
Configuration
System Restart Restarts system with options to use POST, or to retain factory defaults,
IP settings, or user authentication settings.
Exit Exits the configuration program.