Hardware Installation

4.Connect the Power Cable Connect the power adapter cable to the 3.3 V DC power socket on the rear panel.

Warning: USE ONLY the power adapter supplied with the WA5001. Otherwise, the product may be damaged.

The CD-ROM that comes with the package contains a utility program for the access point. Any updates can be downloaded from Accton’s Web site at:

http://www.acctontech.com.

The WA5001 can be configured over an Ethernet network using RJ-45 cable. You may connect the WA5001 to a network device such as a hub or switch. Then, run the utility program, and configure the WA5001 remotely, as described on the next page.

5

Page 13
Image 13
Accton Technology WA-5001 manual Hardware Installation