Disassembling the LCD Module and Upper Case
1.Disconnect the LCD cable from the power board.
2.Remove the two screws that secure the power board.
3.Remove another four screws that secure the power board.
4.Remove the power board from the upper case.
5.Tear off the mylar on the touchpad FFC.
6.Disconnect the touchpad FFC from the touchpad board.
7.Remove the three screws that secure the touchpad bracket.
8.Remove the touchpad bracket from the upper case.
9.Remove the touchpad board from the upper case.
10.Tear off the mylar on the wireless antenna.
11.Remove the wireless antenna from the wire groove.
12.Remove the three screws that secure the LCD hinge on both sides.
Chapter 3 | 68 |
