Acer 4820T manual DOS Flash Utility, Usb Hdd

DOS Flash Utility

Perform the following steps to use the DOS Flash Utility:

1.Press F2 during boot to enter the Setup Menu.

2.Select Boot Menu to modify the boot priority order, for example, if using USB HDD to Update BIOS, move USB HDD to position 1.

				InsydeH20 Setup Utility		Rev. 3.5
Information Main			Security	Boot	Exit
	Boot priority order:					Item Specific Help
Use < > or < > to select
	1		. Network Boot : LEGACY PCI DEVICE
2		. USB FDD :				a device, then press
3		. IDE0 : WDC WD5000BEVT-22A0RT0				<F5> to move it down the
	4	. USB HDD :				list, or <F6> to move
	5	. USB CD/DVDROM :				it up the list. Press
						<Esc> to escape the menu
	6	. IDE1 : HL-DT-STDVDRAM GT30N

F1 Help	Select	Item	F5/F6	Change	Values	F9	Setup	Default
ESC Exit	Select	Menu	Enter	Select	SubMenu	F10	Save	and Exit

3.Execute the BIOS.BAT batch file to update BIOS. The flash process begins as shown.

34 Chapter 2