Acer 4820T manual Using the LAN MAC Eeprom Utility

Using the LAN MAC EEPROM Utility

You can use the MAC.BAT utility to write the MAC.CFG file to the EEPROM in DOS mode.

1.Use a text editor to open the MAC.CFG file. You can see the MAC.CFG contents as shown:

WriteData = ‘001122334455'	MAC value
StartAddr=7A	MAC address
WriteLeng=6	MAC value length
KeepByte=0	don’t care

2.In DOS mode, run the MAC.BAT file to write MAC values to eeprom.

Chapter 2 41