Acer 4820T manual Main, Parameter Description Format/Option

Main

The Main screen allows the user to set the system time and date as well as enable and disable boot option and recovery.

					InsydeH20 Setup Utility						Rev. 3.5
Information	Main		Security		Power	Boot	Exit
System Time:				[19:10:59]					Item Specific Help
System Date:				[01/22/2010]					This is the help for the
Total Memory:				2048 MB
Video Memory:				32 MB					hour field. Valid range
									is from 0 to 23.
Quick Boot				[Enabled]					INCREASE/REDUCE: F5/F6
Network Boot				[Enabled]
F12 Boot Menu				[Disabled]
D2D Recovery				[Enabled]
SATA Mode				[AHCI]
F1 Help		Select		Item	F5/F6	Change		Values	F9	Setup	Default
ESC Exit		Select		Menu	Enter	Select		SubMenu	F10	Save	and Exit

NOTE: The screen above is for your reference only. Actual values may differ.

The table below describes the parameters in this screen.

Parameter	Description	Format/Option
System Time	Sets the system time. The hours are displayed with 24-	Format: HH:MM:SS
	hour format.	(hour:minute:second)
System Date	Sets the system date.	Format MM/DD/YYYY
		(month/day/year)
Total Memory	Displays the total memory available.	N/A
Video Memory	Displays the available memory for Video.	N/A
Quick Boot	Allows startup to skip certain tests while booting,	Option: Enabled or
	decreasing the time needed to boot the system.	Disabled
Network Boot	Enables, disables the system boot from LAN (remote	Option: Enabled or
	server).	Disabled
F12 Boot Menu	Enables, disables Boot Menu during POST.	Option: Enabled or Enabled
D2D Recovery	Enables, disables D2D Recovery function. The function	Option: Enabled or
	allows the user to create a hidden partition on hard disc	Disabled
	drive to store operation system and restore the system
	to factory defaults.
SATA Mode	Control the mode in which the SATA controller should	Option: AHCI or IDE
	operate.

Chapter 2 27