Acer 6492 manual Parameter Description Format/Option, F12Change Boot Device

The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.

Parameter	Description	Format/Option
System Time	Sets the system time. The hours are	Format: HH:MM:SS
	displayed with 24-hour format	(hour:minute:second)
System Date	Sets the system date	Format MM/DD/YYYY
		(month/day/year)
System Memory	This field reports the memory size of the
	system. Memory size is fixed to 640MB
Extended Memory	This field reports the memory size of the
	extended memory in the system
	(Extended Memory size=Total memory
	size-1MB)
Video Memory	Shows the VGA memory size
Quiet Boot	Determines if Customer Logo will be	Option: Enabled or Disabled
	displayed or not; shows Summary Screen
	is disabled or enabled
	Enabled: Customer Logo is displayed, and
	Summary Screen is disabled
	Disabled: Customer Logo is not displayed,
	and Summary Screen is enabled
Network Boot	Enables or disables the system boot from	Option: Enabled or Disabled
	LAN (remote server)
F12 Boot Menu	Enables or disables Boot Menu during	Option: Disabled or Enabled
	POST. Enabled: During quite boot, the
	OEM POST screen displays Press
	<F12>Change Boot Device
	Disabled: During quite boot, the OEM
	POST screen does not display Press
	<F12>Change Boot Device
	Note: This Boot device change is applies to
	next boot only.
D2D Recovery	Enables or disables D2D Recovery	Option: Enabled or Disabled
	function. The function allows the user to
	create a hidden partition on hard disc drive
	to store operation system and restore the
	system to factory defaults

Note: The sub-items under each device will not be shown if the device control is set to disable or auto. This is because the user is not allowed to control the settings in these cases.

50 Chapter 2