Removing the Wireless Card

Note: Fine tweezers are required for this procedure.

1.Locate the three antenna wires (colored white, gray, and black) on the right-hand side of the HDD bay.

2.Using fine tweezers, grip the white wire and pull upward until it is released from the board.

Repeat for the gray and black wires.

3.Locate the two screws securing the Wireless Card.

5. Grip card and pull away from socket as shown.

4.Locate and remove the two screws securing the Wireless Card.

Note: The Wireless Card lifts up automatically once the screws are removed.

Chapter 3

67

Page 77
Image 77
Acer 6492 manual Removing the Wireless Card