Replacing the TouchPad

1. Using both hands, replace the TouchPad as shown.

Note: Ensure that the TouchPad cable is accessible once the TouchPad is in place.

2.Using tweezers, grip the TouchPad cable and insert it into the connector on the Motherboard as shown. Secure the locking latch to hold the cable in place.

Replacing the LCM Module

1.Align the four screw holes on the LCM Module hinges with the corresponding screw holes on the chassis. Lower the LCM Module into position as shown. Ensure that the LCM cables are inserted through the aperture before proceeding (yellow marker).

2. Connect the LCM Module cable to the connector on the chassis as shown.

88

Chapter 3

Page 98
Image 98
Acer 6492 manual Replacing the TouchPad, Replacing the LCM Module