Acer 65PE specifications OSD Main OSD Menu, Function

Figure 20 Main OSD menu

Resetting Lamp Timer

If replacing the lamp after 1500 hours of operation, please carry out the following operation within 10 minutes of powering on.

OSD		FUNCTION
	Press the Exit button on the
	projector for 3 seconds or the
	Exit button on the remote
	control for 3 seconds and
	display the total lamp usage
	time.
	Press the Menu button on the
	projector or the remote control
	while the lamp usage time is
	being displayed, and the lamp
	hour display will be active and
	adjustable.
	Select the "Reset" item on
	the	screen using the 34
	buttons or on control pad or
	remote.

Lamp Hours Used/Reset

OSD

Main OSD Menu

Press the “Menu” key and the main OSD menu structure will appear as shown at right (Fig. 23). Whenever AV box is attached, 4 subpages appear in the menu: Display page, Image page, Control page, and Source page. However if input is from PC and no AV box is attached, Source will disappear in the menu.

Press the “Menu” key again to enter Display page items, or press “3” or “4” to select sub-pages. (The main OSD menu will automatically disappear if a key is not pressed within 10 seconds).

Press the “Exit” button to leave the current sub-page, and press the button again to leave the main OSD menu

(at the same time the settings are saved).

English 17