The picture will become dark or the color will fade after the lamp has been used for a long time. In such cases, continued use of the lamp could cause a malfunction. Replace the lamp with a new one.
A Lamp/temperature Status LED Indicator
1.Lamp in excess of service hours
When the LED light is a continuous red, it means the lamp has exceeded (*1500) service hours. After this light appears, it is advisable to replace the projection lamp as soon as possible.
i.“CHANGE THE LAMP, AND RESET THE LAMP TIMER” will be displayed on the screen if the lamp has been operated for 1200 hours (see figure 16).
ii.“CHANGE THE LAMP, THE POWER WILL TURN OFF AFTER 20 HOURS” will be displayed on the screen if the lamp has been operated for 1479 hours. The “20” will count down (see figure 17).
iii.“CHANGE THE LAMP!” will blink on the screen together with a red LED if the lamp has been operated for more than (*1500) hours (see figure 18). The power will turn off automatically after 10 minutes. All three of the above messages will not display for more than 3 minutes, but each message will be displayed whenever you turn on the lamp.
Figure 16 Lamp replacement warning signal
English 13
