AcerAltos 19000 User’s Guide
6-12
Step 4: Examine Switches or Print Report
This selection lists the boards installed in your computer. Figure 6-5 shows a
sample Examine Switches or Print Report screen.
Boards marked with an arrow on the screen may have defined jumpers and
switches that you must physically verify. It may also mean that there is a
software statement with additional information about the board.
To view the switch and jumper settings, highlight the board marked with an
arrow and press Enter.
You can print a hard copy of the switch and jumpers settings or you can print the
information to a TXT file (see the section “Configuring Your Computer for the
First Time” for details).
You must PHYSICALLY verify that the switches and jumpers
of each board marked with an arrow ( → ) are set as
required. These settings cannot be detected or changed by
this program.
To view the required settings for the highlighted
board, press ENTER. Pick up the board and compare its
settings to the required settings. Change the board
settin
g
s to match the re
q
uired settin
g
s.
> System AcerAltos Server
Slot 1 (Empty)
Slot 2 (Empty)
Slot 3 (Empty)
Embedded PCI SCSI Controller
Step 4: Examine switches or print report
>View=ENTER< <Print=F7> <Done=F10>
Figure 6-5 Examine Switches or Print Report