AcerAltos 19000 User’s Guide
6-20
6.3.5 Configuring Memory
Each time you change your system’s memory configuration, you must
reconfigure the computer using the ECU.
When removing memory, run the ECU and
change memory size before physically
removing the memory; otherwise, the system
may become inoperable.
The following discussion describes how to configure a system for 96 MB of
memory.
1. Highlight Step 3: View or edit details from the ECU main menu, then press
Enter. The View or Edit details screen displays (a sample screen is shown in
Figure 6-4).
2. Use the up and down arrow keys to highlight the memory function you wish
to configure. In this example, your basic system configuration is installed
with 32 MB; therefore, the 16 - 64MB System Memory parameter is the first
memory function you must configure.
a) Highlight 16 - 64MB System Memory, then press Enter.
b) The System Memory Functions screen displays, showing the function is
enabled: