55
5If you are replacing a hard disk, remove the four screws that secure the hard disk to the carrier (1), then remove the disk from the carrier (2).
6 Keep the screws for later installation.
To install a new hard drive to an empty carrier:
1Perform steps 1 through 5 of the previous section.
2Remove the four screws. Save the screws for later use.
3Remove the new HDD from its protective packaging.
4Install the new hard disk into the HDD carrier. Secure it with the four screws you removed.
English
5Install the new hard drive into the drive bay.
a Slide the drive into the bay with the carrier handle still extended.
