Once installed, the ASC SAN Client software runs as a Windows NT/2000 service.
The service is configured to start automatically when Windows starts. The
configuration of the storage resources used by the Client is done through the
ASC Console.
Once configured, the ASC SAN Client software connects to the appropriate ASC
Servers and gets the assigned resources.
Note: If you assign add tional resou ces to the Client from a new Server after
you have installed the Client, you will need to add that Server from the Client
Mon tor.
i r
i
ASC SAN Client Monitor
The ASC SAN Client Monitor runs on the Client computer. It allows you to
stop/start the Client, connect/disconnect a Server, attach/detach devices,
add/delete/organize Servers, set debug options, filter the Event Viewer
information, and monitor the status of the Client’s connections to its SAN
Resources and Servers.
To launch the ASC SAN Client Monitor:
(
Start
-->
Programs
-->
Acer ASC
-->
SAN Client Monitor
)
Acer Altos® NAS 700 Solution Guide
99