Acer NAS 700 ICCMD Start Server=serverIPAddress Debug=2

Type the following:
ISCMD Remove server= serverIPAddress
In the ASC Console, right-click on the SAN/IP client, unassign the device, and
then delete the client.
To uninstall the client, refer to the sanon.ncf file in the sys:\system directory to
find the files that need to be removed.
Disk copies
If you mirror, copy, or replicate a virtual device you cannot assign the copy to
the same client to which the primary is assigned unless you first rename the
Novell volume to a different name. The operating system does not handle the
device the same way as other operating systems do.
For example, with Windows 2000, if the replica is assigned to the same server
as the primary, a different drive letter is assigned by the operating system.
Troubleshooting
ISCMD command log: Run the ISCMD command with option DEBUG=2. The
debugging message will be written to the log file ISCMD.LOG located in the
directory SYS:\SYSTEM.
For example:
ICCMD Start Server=serverIPAddress Debug=2
ASC SAN client trace log: Run the command SANDRV +debug +ip3 on the
NetWare System Console. The trace log will be written to the log file
TRACELOG.XML located in the directory SYS:\SYSTEM.
Acer Altos® NAS 700 Solution Guide
111