To rescan all adapters and search for new devices, right-click on
Physical
Resources
and select
Rescan
.
(Linux only) If you only want to scan a specific adapter, right-click on that
adapter and select
Rescan
.
Set the range of SCSI IDs and LUNs that you want to scan.
For Linux, the
Sequential
option works in conjunction with the LUN range. You
should only use it if all of your devices are numbered sequentially, because
scanning will stop once the last sequential device is found. If you do not select
Sequential
, ASC will continue scanning to the ending LUN number specified.
Determine if you want to discover new devices.
If you want ASC to discover new devices as well as rescan existing devices, be
sure to select the
Discover New Devices
option. If selected, you should enter a
SCSI ID range. It is not needed if you are only rescanning existing devices.
Acer Altos® NAS 700 Solution Guide
62