1. After the Linux installation, you must enter into the BIOS by pressing
F2 and check that your boot order is configured as shown in the
picture below:
We recommend to have the Hard Drive selected as 1st Boot Device on your
Altos NAS 700.
2. Select “Red Hat Linux (2.4.18-3smp)” to boot Linux.
3. Enter your login and password for your ROOT account
Please Note: If login with the ROOT account, you’ll receive a warning
message telling you it’s risky to log onto an X environment with the full
administrative privileges. Just click on the OK button.
Acer Altos® NAS 700 Solution Guide
24