Start the client
You can start the client by typing the following command from the NetWare
console screen to start the client:
Sanon
ISCMD Start Server=
serverIPAddress
When prompted, enter your username and password.
Type the following to mount your volumes:
Mount all
If you change a LUN or add a device, you will need to restart the Client in order
for the changes to take effect.
Set the client to automatically start after server reboot
To start the SAN Client automatically upon boot up, add the following to the
end of the Autoexec.ncf file.
Sanon
Iscmd start server= x x x x noscreen=1
Stopping and removing the client
Unmap the share on the Windows side.
Dismount the ASC SAN/IP device from the Novell server.
Go to the Novell server and type the following:
ISCMD Stop server=
serverIPAddress
Acer Altos® NAS 700 Solution Guide
110