Acer NAS 700 - page 94

Select the SAN Resource to be assigned.
Read/Write - Only one client can access this SAN Resource at a time. All others
(including
Read Only ) will be denied access. This is the default.
s
Read/Write Non-Exclusive
- Two clients can connect at the same time with both
read and write access. You should be careful with this option because if you
have multiple clients writing to a device at the same time, you have the
potential to corrupt data. This option should only be used by clustered servers,
because the cluster itself prevents multiple clients from writing at the same
time.
Read Only
- This client will have read only access to the SAN Resource. This
option is useful for a read-only disk.
Note: Fibre Channel SAN client is not upported under ASC 4.0 Express.
Acer Altos® NAS 700 Solution Guide
86